1 files changed, 114 insertions, 0 deletions
diff --git a/glew/auto/EGL-Registry/extensions/TIZEN/EGL_TIZEN_image_native_buffer.txt b/glew/auto/EGL-Registry/extensions/TIZEN/EGL_TIZEN_image_native_buffer.txt
new file mode 100644
index 0000000..72710b7
--- /dev/null
+++ b/glew/auto/EGL-Registry/extensions/TIZEN/EGL_TIZEN_image_native_buffer.txt
@@ -0,0 +1,114 @@
+Name
+
+    TIZEN_image_native_buffer
+
+Name Strings
+
+    EGL_TIZEN_image_native_buffer
+
+Contributors
+
+    Dongyeon Kim
+    Minsu Han
+    Inpyo Kang
+    Zeeshan Anwar
+
+Contact
+
+    Dongyeon Kim, Samsung Electronics (dy5.kim 'at' samsung.com)
+    Zeeshan Anwar, Samsung Electronics (z.anwar 'at' samsung.com)
+
+Status
+
+    This extension is obsolete and has been replaced by 
+	EGL_TIZEN_image_native_buffer
+
+Version
+
+    Version 2, July 23, 2014
+
+Number
+
+    EGL Extension #76
+
+Dependencies
+
+    EGL 1.2 is required.
+
+    EGL_KHR_image_base is required.
+
+    This extension is written against the wording of the EGL 1.2
+    Specification.
+
+Overview
+
+    This extension enables using a Tizen native buffer (struct
+    native_buffer) as an EGLImage source.
+
+New Types
+
+    None.
+
+New Procedures and Functions    
+
+    None.
+
+New Tokens
+
+    Accepted by the <target> parameter of eglCreateImageKHR:
+
+    EGL_NATIVE_BUFFER_TIZEN             0x32A0
+
+Changes to Chapter 3 of the EGL 1.2 Specification (EGL Functions and Errors)
+
+    Add to section 2.5.1 "EGLImage Specification" (as defined by the
+    EGL_KHR_image_base specification), in the description of
+    eglCreateImageKHR:
+
+   "Values accepted for <target> are listed in Table aaa, below.
+
+      +-------------------------+--------------------------------------+
+      | <target>                | Notes                                |
+      +-------------------------+--------------------------------------+
+      | EGL_NATIVE_BUFFER_TIZEN | Used for Tizen native_buffer objects |
+      +-------------------------+--------------------------------------+
+       Table aaa.  Legal values for eglCreateImageKHR <target> parameter
+
+    ...
+
+    If <target> is EGL_NATIVE_BUFFER_TIZEN, <dpy> must be a valid display,
+    <ctx> must be EGL_NO_CONTEXT, <buffer> must be a pointer to a valid
+    native_buffer object (cast into the type EGLClientBuffer), and
+    attributes other than EGL_IMAGE_PRESERVED_KHR are ignored."
+
+    Add to the list of error conditions for eglCreateImageKHR:
+
+      "* If <target> is EGL_NATIVE_BUFFER_TIZEN and <buffer> is not a
+         pointer to a valid native_buffer, the error EGL_BAD_PARAMETER
+         is generated.
+
+       * If <target> is EGL_NATIVE_BUFFER_TIZEN and <ctx> is not
+         EGL_NO_CONTEXT, the error EGL_BAD_CONTEXT is generated.
+
+       * If <target> is EGL_NATIVE_BUFFER_TIZEN and <buffer> was created
+         with properties (format, usage, dimensions, etc.) not supported by
+         the EGL implementation, the error EGL_BAD_PARAMETER is generated."
+
+Issues
+
+    1. Should this extension define what combinations of native_buffer
+    properties implementations are required to support?
+
+    RESOLVED: No.
+
+    The requirements have evolved over time and will continue to change with
+    future Tizen releases. The minimum requirements for a given Tizen
+    version should be documented by that version.
+
+
+Revision History
+
+#2 (Zeeshan Anwar, July 01, 2014)
+    - Assigned the value to EGL_NATIVE_BUFFER_TIZEN
+#1 (Dongyeon Kim, June 05, 2013)
+    - Initial draft.